SFA 009FOS110KIT Hydraulic Evacuation Kit

The SFA Sanitrit 009FOS110KIT hydraulic discharge kit is the specific accessory used to complete the hydraulic installation of the Sanifos 110 pumping station. The set includes a non-return valve and a double-union ball valve, making it easier to connect the discharge pipe and providing the necessary components to control wastewater flow and prevent it from returning to the station.

Specifically designed for the Sanifos 110, this kit simplifies the installation of the discharge line and makes future maintenance tasks easier. The non-return valve protects the installation against backflow, while the shut-off valve allows the station to be hydraulically isolated when intervention is required.

Specific hydraulic kit for Sanifos 110

Reference 009FOS110KIT has been developed by SFA Sanitrit as a specific accessory for the Sanifos 110 wastewater pumping station.

SFA defines it as a complete discharge kit designed to facilitate the installation and hydraulic connection of the pumping station. In this way, the installer has in a single set the main elements needed to properly control wastewater discharge.

Includes non-return valve

The kit incorporates a non-return valve, whose function is to allow wastewater to flow only in the discharge direction and prevent it from returning to the station once the pump stops operating.

This component is especially important in a pumping installation, as it helps prevent water in the discharge pipe from flowing back into the tank.

In addition to promoting the correct hydraulic operation of the installation, the non-return valve helps protect the pump and the rest of the components against problems associated with backflow.

Double-union ball valve

The second main element of the set is a double-union ball valve, used as a shut-off valve in the discharge line.

The valve allows you to manually open or close the wastewater flow, making it possible to isolate the pumping station from the rest of the installation when inspection, maintenance, or intervention is required.

Its double-union design also makes it easier to remove the corresponding hydraulic section without having to modify the entire installed pipework.

Makes pumping station maintenance easier

The combination of non-return valve and shut-off valve is especially useful during pumping station maintenance tasks.

By closing the ball valve, the installer can isolate the discharge line, while the non-return valve prevents the water stored in the pipe from returning to the station.

In this way, the kit makes access to the hydraulic components of the installation easier and helps carry out interventions in a more controlled way.

Designed for wastewater discharge

The SFA 009FOS110KIT is intended to work within the Sanifos 110 wastewater discharge system.

The Sanifos 110 is a pumping station designed to collect and lift wastewater from a detached house or commercial premises when the sewer network cannot be reached by gravity.

It can receive wastewater from different sanitary and household fixtures, such as:

• Toilets.
• Washbasins.
• Showers and other compatible sanitary fixtures.
• Washing machines.
• Other wastewater discharge points accepted by the station.

Compatible exclusively with Sanifos 110

Reference 009FOS110KIT appears in the manufacturer’s documentation as a specific hydraulic connection kit for Sanifos 110.

It should not be confused with the hydraulic kits, valves, or accessories used in higher-capacity Sanifos stations, as each installation may require components with different dimensions and hydraulic configurations.

Before installation, always check that the installed station is indeed a compatible SFA Sanifos 110 model.

Connection to the Sanifos 110 discharge line

The Sanifos 110 station discharges wastewater through an external 50 mm pipe. The hydraulic kit is specifically designed to complete this discharge line and facilitate its connection to the installation’s drainage network.

The exact configuration of the downstream piping must be carried out in accordance with SFA Sanitrit recommendations regarding runs, heights, diameters, and station installation.

Prevents wastewater backflow

When a discharge pump stops, part of the water remains inside the discharge pipe. Without a suitable non-return valve, this water column could flow back into the tank.

The non-return valve included in the kit is specifically designed to prevent this reverse flow, keeping wastewater moving in the correct discharge direction.

This avoids unnecessary pumping caused by water returning and is part of a correctly configured hydraulic installation.

Shut-off valve to isolate the installation

The ball valve included allows the pipe to be completely closed when it is necessary to isolate the station.

This function is especially practical during maintenance operations, component replacement, or pump inspection, as it allows the Sanifos 110 to be hydraulically separated from the downstream pipework.

Accessory for easier installation

SFA markets this kit as a complete solution to facilitate the installation and connection of the Sanifos 110 pumping station.

By supplying the non-return valve and the double-union ball valve together, it simplifies the selection of the basic components located in the discharge line.

This is especially useful for professional installers looking to use accessories specifically intended by the station manufacturer.

Features of the SFA 009FOS110KIT

• Brand: SFA Sanitrit.
• Reference: 009FOS110KIT.
• Name: Sanifos 110 hydraulic kit.
• Product type: hydraulic discharge kit.
• Application: wastewater pumping stations.
• Compatibility: SFA Sanifos 110.
• Includes non-return valve: yes.
• Includes shut-off valve: yes.
• Shut-off valve type: ball valve.
• Ball valve configuration: double union.
• Non-return valve function: prevent wastewater backflow.
• Ball valve function: hydraulically isolate the discharge line.
• Sanifos 110 discharge line: external 50 mm pipe.
• Gross kit weight: 2.2 kg.
• EAN code: 3308815077024.

Original SFA Sanitrit accessory for Sanifos 110

The SFA Sanitrit 009FOS110KIT hydraulic kit allows the Sanifos 110 discharge line to be completed using a set specifically designed by the manufacturer.

The inclusion of a non-return valve helps prevent wastewater from returning to the station, while the double-union ball valve allows the flow to be shut off and makes maintenance operations easier.

It is therefore an accessory especially suitable for new Sanifos 110 installations or for projects where a compatible hydraulic connection solution is needed, designed to facilitate both operation and future maintenance of the pumping station.