Three-phase Electric Car Charger 22 kW Circutor eHome 5 T2S32 TRI N

The Circutor eHome 5 T2S32 TRI N electric car charger, reference V25540, is a three-phase wall-mounted charging point designed mainly for private garages and residential environments. It delivers a maximum power output of 22 kW at 400 V and 32 A and features a Type 2 socket, allowing you to use the charging cable compatible with each vehicle. It also includes WiFi and Ethernet connectivity, RFID reader, LED indicator, and 6 mA DC residual current detection.

The eHome 5 range has been developed to provide intelligent home energy management. Using compatible metering accessories, it can automatically adapt the power allocated to the vehicle according to the home’s consumption and integrate with photovoltaic installations to take advantage of solar production. Its app also allows you to manage, schedule, and monitor charging sessions from compatible devices.

Three-phase charger up to 22 kW

The Circutor V25540 is designed for a three-phase 3P + N + PE electrical installation and operates at a nominal voltage of 400 V AC ±10 %, with a frequency of 50/60 Hz.

The maximum current is 32 A, allowing it to deliver up to 22 kW of power. This capacity makes it possible to take advantage of high-power three-phase installations and reduce charging time compared with lower-power charging points, provided the vehicle is capable of accepting 22 kW in AC.

The actual charging power will be limited by the lowest value among the power configured in the charger, the available capacity of the electrical installation, and the maximum power accepted by the vehicle’s onboard charger.

Type 2 socket

Reference V25540 includes a Type 2 connection socket rather than a fixed cable. To charge, a compatible Type 2 cable is required between the charging point and the vehicle.

This configuration offers flexibility for the user, as the charging cable can be stored when not in use and replaced independently of the charger if necessary.

Type 2 is the widely used standard in Europe for AC electric vehicle charging.

Mode 3 charging

The Circutor eHome 5 charges in Mode 3, using communication between the charging point and the vehicle to properly control the charging process.

It features one charging socket and is designed to charge an electric vehicle or plug-in hybrid compatible with Type 2 connection.

WiFi and Ethernet connectivity

The eHome 5 includes WiFi and Ethernet as standard, allowing it to connect to the network and access its advanced configuration, monitoring, and control functions.

Connectivity makes remote charging management easier and enables the charger to be integrated into a smart home installation.

Control via the eHome 5 app

Circutor offers a dedicated app for eHome 5 that allows user authentication, charging session management, and monitoring.

From the app, you can check charging status information, access session history, select operating modes, and make different charger settings.

It also allows you to schedule charging, making it easier to take advantage of lower electricity tariff periods or times when solar production is higher.

Intelligent management of available power

By installing the compatible meter for dynamic load balancing, available as an accessory, the eHome 5 can automatically adapt the power allocated to the electric car based on the home’s instantaneous consumption.

This energy balancing function is designed to reduce the risk of exceeding the available power when other appliances or electrical equipment are running at the same time.

When household consumption decreases, the charger can increase the power available to the vehicle; if domestic demand rises, it can automatically reduce the power allocated to charging.

Integration with photovoltaic installations

The Circutor eHome 5 can be integrated with a solar photovoltaic installation using compatible metering devices.

Circutor offers three energy management modes:

• Just Green: uses only the available photovoltaic surplus to carry out charging.
• Smart Mix: combines solar surplus with energy from the grid, prioritizing photovoltaic production.
• Boost: uses the maximum available power to prioritize charging speed.

These modes make it possible to adapt the charging process to different priorities, from maximizing solar self-consumption to delivering maximum power when the vehicle needs to be charged in less time.

Compatible with any photovoltaic inverter

Circutor specifies that the photovoltaic management of eHome 5 is compatible with any inverter, since the system manages energy by measuring the electrical flows of the installation.

This makes it easy to use both in existing photovoltaic installations and in new self-consumption projects.

Net metering and energy scheduling

The eHome 5 platform includes energy balancing and net metering functions, as well as scheduling based on time slots and solar energy availability.

These features make it possible to better coordinate vehicle charging with the overall operation of the home and the output of the photovoltaic installation.

Integrated RFID reader

The charger includes an RFID reader that allows users to be identified and authorized before certain charging sessions begin.

This function is especially useful in shared parking areas, communal garages, or locations where unauthorized use of the charger must be prevented.

Circutor indicates RFID compatibility with:

• ISO/IEC 14443 A/B.
• FeliCa.
• ISO/IEC 15693.

RFID authorization can also be used in locations where the charger does not temporarily have Internet access.

Configurable access modes

The eHome 5 allows charging authorization to be adapted to the type of installation. In restricted configurations, a session can be started using a previously registered RFID card or from the app.

This functionality provides greater control when the charging point is installed in private or semi-public spaces with access by different users.

6 mA DC residual current protection

The Circutor V25540 incorporates 6 mA DC residual current detection, a protection specifically related to electric vehicle charging.

Circutor indicates that the installation protection system can be completed with a suitable panel to provide Type A residual current protection, thermal-magnetic protection, and protection against permanent and transient overvoltages.

The necessary protections must be defined during the project and installation in accordance with current regulations and the manufacturer’s technical instructions.

LED status indicator

The front of the charger includes an LED indicator that visually informs you of the operating status and charging process.

This signaling makes it easy to quickly check whether the charger is available, authorized, connected to the vehicle, or carrying out a charging session.

IP55 and IK10 protection

The Circutor eHome 5 V25540 has an IP55 protection rating against dust and water and an IK10 mechanical resistance rating against impacts.

These features provide a high level of enclosure protection for the intended installation conditions, always following the manufacturer’s mounting instructions.

Wide operating temperature range

The charger is designed to operate at ambient temperatures between -30 and +50 °C.

The specified storage range is -40 to +60 °C, while the permitted relative humidity is between 5% and 95% non-condensing.

Self-extinguishing enclosure

The enclosure is made of self-extinguishing ABS-PC V0 plastic, a material selected to provide strength and safety in an electrical device intended for fixed installation.

This reference has a black finish.

Compact wall-mounted design

The eHome 5 measures only 180 mm wide, 315 mm high, and 115 mm deep.

Its compact format makes installation easier on walls in private garages, communal parking spaces, and other areas intended for electric vehicle charging.

It is fixed by wall mounting with three-point anchoring. Circutor states a net weight of approximately 3.2 kg in the current product sheet.

Management of up to two eHome 5 chargers

The eHome 5 ecosystem allows you to install, configure, and manage up to two units simultaneously in the same home, including installations with photovoltaic integration.

This option is especially useful in homes with two electric vehicles or where the installation is being prepared for future expansion.

OCPP 1.6J protocol

Circutor documentation for the eHome 5 range specifies compatibility with the OCPP 1.6J communications protocol, expanding the communication and management possibilities of the charging point.

Technical specifications of the Circutor V25540

• Brand: Circutor.
• Range: eHome 5.
• Model: eHome 5 T2S32 TRI N.
• Reference: V25540.
• Type: wall-mounted electric vehicle charger.
• Main application: home charging and private parking.
• Network type: three-phase.
• Configuration: 3P + N + PE.
• Nominal voltage: 400 V AC ±10 %.
• Frequency: 50/60 Hz.
• Input current: 32 A.
• Maximum output current: 32 A.
• Maximum power: 22 kW.
• Charging mode: Mode 3.
• Number of sockets: 1.
• Connector type: Type 2 socket.
• Fixed charging cable: no.
• WiFi: yes.
• Ethernet: yes.
• Management app: eHome 5.
• RFID reader: yes.
• LED indicator: yes.
• Integrated DC residual protection: 6 mA DC detection.
• Dynamic power management: available via compatible meter.
• Photovoltaic integration: available via compatible meter.
• Compatible with any photovoltaic inverter: yes.
• Just Green mode: yes, with compatible solar management.
• Smart Mix mode: yes, with compatible solar management.
• Boost mode: yes.
• Charging schedule: yes.
• Energy balancing: yes, with compatible configuration.
• Management of up to 2 eHome 5 units: yes.
• OCPP protocol: OCPP 1.6J.
• Protection rating: IP55.
• Impact resistance: IK10.
• Operating temperature: -30 to +50 °C.
• Storage temperature: -40 to +60 °C.
• Relative humidity: 5-95%, non-condensing.
• Enclosure material: self-extinguishing ABS-PC V0 plastic.
• Mounting: wall-mounted.
• Fixing: wall anchoring at 3 points.
• Dimensions: 180 x 315 x 115 mm.
• Net weight: approximately 3.2 kg.
• Finish: black.

Standards and directives

Circutor declares compliance for this reference with different standards and directives applicable to electric vehicle charging equipment:

• IEC 61851-1.
• IEC 61851-21-2.
• IEC 62196-1.
• IEC 62196-2.
• EN 18031-1.
• Directive 2014/35/EU.
• Directive 2014/53/EU.
• Directive 2014/30/EU.
• RoHS 2011/65/EU.

Circutor eHome 5 three-phase charger with Type 2 socket

The Circutor eHome 5 T2S32 TRI N V25540 is a complete solution for users with three-phase supply who are looking for a home charging point of up to 22 kW with connectivity and advanced energy management options.

Its Type 2 socket allows the use of an independent charging cable, while WiFi, Ethernet, RFID reader, and the eHome 5 app make it easy to monitor and control charging sessions. With compatible metering accessories, it can also dynamically adapt power and take advantage of surplus energy from a photovoltaic installation through Just Green, Smart Mix, and Boost modes.

Thanks to its compact format, IP55 and IK10 protection, black finish, and integration with home energy management systems, the Circutor V25540 is especially suitable for regular charging of electric cars and plug-in hybrids in homes, private garages, and communal parking areas.